Elsinore Project Kits

133 Dalmeny Drive, Prestons NSW 2170, Australia +612-96074650 & 0412-203382

  JLTi Oppo Player        CD & DVD Player Upgrades        JLTi Tube Amps   


Home
TODAY'S SPECIALS
JLTi Lower Cost Players
JLTi EL34 & KT88 Amps
JLTi Yamaha CD/SACD
JLTi BDP Oppo Player
What is Terra Firma?
CD/DVD Upgrades FAQ
Contact Us
Elsinore Speakers DIY
Elsinore Project Kits
JLTi EL34 Wins Shootut
About Joe Rasmussen
JLTi Mk2 Hybrid Amp
JLTi Interconnects
JLTi Review & Comment
JLTi Photos
JLTi Links
CryoMusicSystem.com
Tubes & The Gainclones
DIY Tube Gainclone
DIY Critical Q SubWoof
Critical Q Sub - FAQ
Joe's FVP Page
Joe's Equipment Photos
Fletcher-Munson Curves
Joe's Photos

 

Why Buy A $2200 Elsinore Mk3 Kit?

(Price increase of 10% since May 2009)

(offer mainly applies to Australasia - but all enquires welcome)

To help yourself and to help me. The hours that have been spent on the Elsinore Project, you do not want to know. A thousand hours plus, over a period of six years, would not be far from the truth. Some modest return seems fair - and you will gain something as well.

Here are some of the benefits to you. Not only will you have all the fiddly bits that you will not need to hunt down, but you will also have a direct line to me and my undivided attention. Under those circumstances, no question will be considered silly (the statement on the FAQ Page, please ignore) as you will be my client rather than just anybody fishing for information.

You don't need to pay for STD calls - contact me and I will call you.

"And a big thumbs up to Joe, who managed to withstand my barrage of emails asking stupid questions without telling me to "sod off" even once.  Joe is an absolute pleasure to deal with." Rob Davies, Queensland.

OK, here is what you will receive:

  • 8 x 830875 MidBass Drivers

  • 2 x 810921 Tweeters

  • 2 x Complete & Fully Tested Crossovers - no assembly required

  • 2 x Twin Pair Terminals (for Back Panel)

  • 2 x Single Pair Terminals (also for Back Panel)

  • 2 x PVC Ports cut to correct size - just glue in place

  • 10 x pieces wool/Dacron damping pieces - cut to exact size

  • 50 x Black Screws for 830874 Drivers and 810921 Tweeters

  • 20 x Black Screws for Terminals

  • 4 x Special German Felt pieces  cut to size and ready to fit

  • 2 x Metres of good quality approved Solder

  • 20 x Metres of Cryoed Wire for internal wiring and to Crossovers

  • Full set of Drawings in laser colour A4 for wiring etc.

  • Unlimited personal access by phone or email

You make the boxes themselves and choose the finish. Other than basic tools, soldering iron and glue etc, all the other bits you would normally have to hunt down are included.

The price is $2200 and will include shipping (three boxes, one with main drivers, one with tweeters and all smaller pieces and the last one contains damping material) to NSW, Queensland and Victoria. For other states add $30-50. Usually allow 1-2 weeks. Credit Cards via PayPal is accepted, but please add $35 in fees.

As already stated, you will also get unlimited help from me and all questions that may come to mind, don't hesitate. If phone calls are required, call or email me and I will phone you back and pay for the time. I use VoIP and it is relatively inexpensive.

Additional offer: If the boxes are assembled and ready to go, and if dropped here and picked up, then for an additional $200 the speakers, I will personally fit the kit and you will hear the speakers here at the time of pickup.

Why would I do this for what is a minor amount? Because when others assemble Elsinore speakers and then make a mistake, I may be judged on the basis of a faulty performance. At least I will know that they are functioning exactly as intended!

Email me: joeras@vacuumstate.com or Phone +612-96074650 or 0412-203382

Joe Rasmussen

 

 

Back Home Next

Send mail to joeras@vacuumstate.com with questions or comments about this web site.
Copyright © 2003-10 Joe Rasmussen & JLTi
Last modified: Saturday July 23, 2011

Just had a terrible thought. If "intelligent design" is unscientific, then who will design our audio equipment?